Add a firewall rule for gke nodes (2023)

Source code: (report an issue) This module allows the creation of a minimal VPC firewall, supporting configurable basic rules for allow all protocols on all ports; an optional inbound rule for SSH in the ssh nettag; an optional

This topic describes how to configure network resources to use Oracle Cloud Infrastructure Web Application Firewall to contain the necessary network resources (such as a VCN, subnets, Internet gateway, route table, security lists). In this case, you specify public or private subnets when defining nodegroups in a cluster.

A Terraform module for creating a Google Kubernetes Engine (GKE) cluster with Spot Ocean. add_cluster_firewall_rules, create additional firewall rules, bool, false, no create_service_account, defines whether the service account specified to run nodes should be Ask a question on Stack Overflow and tag it with terraform-spotinst.

VPC firewall rules allow or deny connections to or from your virtual machine When you create or modify a firewall rule, you can specify instances in which Google Cloud will not allow certain IP protocols, such as outgoing traffic on destination TCP A, that defines the instances (including GKE Clusters and App Engine.

The packets are replicated between the nodes to ensure that they are ultimately consistent. You can only add allow rules: allow as much as you need and leave all Check default rule name: gcloud compute firewall rule list [NAME This is similar to: /how-to-run-a-.

GCP Load Balancer (Google Cloud product): Cloud Load Balancing allows you to manually configure your GCP load balancer and configure it to direct traffic to your GKE cluster nodes. of load balancing options available in GPC and learn how to choose the one that's right for you. I just created a firewall rule to allow traffic from 130.

Authorized networks for GKE Cluster Master Access VPC firewall rules are used to allow or deny connections to virtual machine instances and This means that firewall rules can provide inter-instance and other types of protection. When you define a VPC firewall rule, you can target specific types of network traffic. This.

Browse Google Documentation A single firewall rule that is evaluated against incoming traffic and gives priority: (Optional) A positive integer that defines the order of evaluation of the rule. terraform import google_app_engine_firewall_rule.default This function supports user project overrides. Report a problem.

🇧🇷 customizations Configuration of your firewall. Configuring a private cluster As a cluster administrator, you can use an outbound firewall to limit the external network policy or multi-user modes to configure the outbound firewall policy. The pod should resolve the domain from the same local nameservers when necessary.

You can secure the Kubernetes API server using whitelisted networks and private clusters, which allow you to assign a private IP address to the control plane and disable access to the public IP address. You can handle cluster authentication to Google Kubernetes Engine by using IAM as the identity provider.

Copy and paste into the terraform config, insert variables and run terraform init: source code: (report a problem ). Readme Inputs (3) Output (1) This module allows you to create custom VPC firewall rules.

(Video) Introduction to GKE cluster networking

Visit the Provision a GKE (Google Cloud) Cluster tutorial to learn how. See the Using GKE with Terraform guide for more information on using GKE's addons_config: (optional) configuration of GKE-compatible plugins. Adding this block enables IP aliasing, making the cluster native to the VPC instead of .

Follow these instructions to prepare a GKE cluster for Istio. The default Istio installation requires nodes with >1 vCPUs. If you install with demo configuration profile 1, you can An automatically created firewall rule does not open port 15017. download discuss stack overflow slack twitter.

Fix race condition by creating firewall allow rules (#709) Revert to manual upload until marketplace issue closes (#703) Google. Change os_image to be required. It is recommended to load a Flatcar Add support for Fedora CoreOS fragments ( terraform-provider-ct v0.5+) (#686) Change asset_dir to optional.

However, users and developers can add more functions in the form of custom function definitions. New features allow cluster operators more flexibility when Tags: bulletin, containers, kubernetes, serverless, stackoverflow over 5 programming languages, and enough scripts/node/edge.

If you are using a private GKE cluster, you will need to create a firewall rule that allows the GKE-operated API server to communicate with the Linkerd control plane. This makes it possible for features like automatic proxy injection to receive requests directly from the API server.

This page describes the firewall rules that are automatically created by Google Kubernetes Engine (GKE) in Google Cloud. In addition to the GKE-specific rules listed on this page, standard Google Cloud designs include a number of pre-populated firewall rules.

Google Cloud Platform (GCP) firewall rules allow or deny traffic to and from When you create a firewall rule, you specify a Virtual Private Cloud (VPC) network and the egress rules are configured to allow traffic from the controller to the net.

It is strongly recommended to only allow access to these ports from trusted networks. On the resulting page, create a new firewall rule for your network by clicking "Create traffic direction: select the "Inbound" option.

Add or edit the tag on the existing nodegroup in GKE. learn more about Stack Overflow, the company, learn more about hiring developers or I think the firewall rules should be created automatically, but since nodes are never installed this may not happen.

GKE creates the following ingress firewall rules when creating a cluster: gke-[cluster-name]-[cluster-hash]-master, for private clusters only. Kubelet, to communicate with pods on a node, as required by the Kubernetes network model.

Deploy a Spring Boot Java application on Kubernetes for Google Kubernetes Engine in many different environments, from laptops to highly available multi-node clusters. The codelab will use the sample code from the guide to create an application.

Every project you create on GCP comes with default firewall rules. Come on. default-allow-icmp – Allow from any source for all IP addresses on the network. Traffic direction: select the type of flow between incoming (incoming) and outgoing.

To establish a peering connection between the two VPC networks, follow the steps. The next step is to configure the firewall to allow traffic between them. To enable the firewall rule for this example, follow the steps below:.

Motivation Kubernetes pods are created and destroyed to match the selector state, the corresponding Endpoints object is not created automatically. For each Service, it installs iptables rules, which capture the traffic for the .

(Video) GKE: Concepts of Networking

It looks like I needed to manually enable the firewall rule to allow the range of http lb ips to pass the health check. After adding readinessProbe, pods will not be considered ready. I described this in more detail on Stack Overflow.

You can also configure your preferred firewall and security rules to allow these necessary ports and addresses. Required FQDN and Egress Network Rules for AKS Clusters This is not required for private clusters. *:9000

Deploying Applications and Services on Google Kubernetes Engine Google Cloud Professional Developer Exam Prep computing environment; Deploy applications and services on Compute Engine and Google Kubernetes Engine.

Preparing a Google Kubernetes Engine environment for production. Vulnerability scan for images. Secure access with gVisor in GKE Sandbox. Audit log. podSecurityPolicies. Container security considerations.

Linkerd's multi-cluster support works by "mirroring" service information between clusters. Because remote services are represented as Kubernetes services, the full.

Only IPv4 is supported. address - (Optional) The direction of traffic to which this firewall applies; the default is INPUT. Note: for INGO traffic, it is NOT supported.

The firewall blocks all traffic to the instances, even from other instances, unless firewall rules are created to allow it. The default network has it automatically.

Multi-cluster communication. This guide will walk you through installing and configuring Linkerd so that two clusters can communicate with the services hosted on both. They exist.

linkerd install \ \ | kubectl apply -f - # The Linkerd Viz extension also requires a similar configuration: .

Isolation between clusters. If you deploy OpenShift Container Platform on an existing network, firewall rules preserve the isolation of cluster services.

I have a VPC network with a subnet in the range where the nodes reside. There is a route and firewall rules applied to the range,.

Step 2 – Validate your Kubernetes cluster. Kubernetes clusters can be configured in many different ways. Before we can install the Linkerd control plane, we need to do it.

Create a firewall rule that allows SSH traffic from the instance tagged database (vm2) to reach the instance tagged web server (vm1). gcloud compute firewall rules.

Install Linkerd on your own Kubernetes cluster. You can validate that this Kubernetes cluster is correctly configured to run Linkerd. linker verification --.

(Video) How to create a Firewall Rule in GCP to enable port no.

This tag is used in firewall rules that Kubernetes Engine automatically creates for you. You can add your own custom tags at cluster or node pool creation.

Before you start. Create the GKE clusters. Create a Google Cloud firewall rule. Install the Istio control plane. Generate the remote cluster manifest. Install the remote.

GKE creates firewall rules automatically when the following resources are created: GKE clusters, GKE services, GKE entries. The firewall rules below are automatic.

Video created by Google Cloud for the course "Security Best Practices in Google Cloud". Securing workloads on Google Kubernetes Engine involves many things.

The Linkerd control plane can run in high availability (HA) mode. proxy injector in your cluster, you can loosen the webhook failover policy by setting its value.

--ignore-cluster, Ignore the current Kubernetes cluster when checking existing cluster configuration (default false). --image-pull-policy, pull images from Docker.

cert-manager runs on your Kubernetes cluster as a series of deployment resources. Use CustomResourceDefinitions to configure certificate authorities.

Certificate Manager (CertMgr) manages certificates and the Android Certificate, but Compliant (in which the identity information is the same, but current.

If you are using a private GKE cluster, you will need to create a firewall rule gcloud compute firewall-rules create gke-to-linkerd-control-plane \ --network.

gcloud is used to create and delete Kubernetes Engine clusters, including creating and updating clusters with the Istio plugin on GKE. gcloud is included in .

Follow this guide to install and configure an Istio mesh on Google Kubernetes Engine 1 (GKE). previous requirements. This sample requires a valid Google Cloud.

Use the --enable-network-policy flag in the gcloud container clusters create command. For private GKE clusters. An automatically created firewall rule does not.

Use the --enable-network-policy flag in the gcloud container clusters create command. For private GKE clusters. An automatically created firewall rule does not.

Hybrid workload protection on Anthos. StackRox integrates with Google Anthos to provide full lifecycle container and Kubernetes security across all Kubernetes.

(Video) How to create GPC firewall rule to allow traffic between GKE clusters? (3 Solutions!!)

Google Kubernetes Engine makes several important architectural decisions for you that may differ from other Kubernetes cluster installations. These choices are made.

--enable-ip-alias makes the cluster VPC native (not needed for autopilot). --enable-private-nodes Add firewall rules for specific use cases. This section.

Alternatively, see the Ambassador documentation for a more detailed explanation of the configuration and what is happening. Requirements. Two bunches. A.

Private Google Access provides private nodes and their workloads with limited results. See Add firewall rules for specific use cases for more information.

This course will teach you how to orchestrate workloads in Docker containers, deploy them to Kubernetes clusters powered by Google Kubernetes Engine and.

Depending on your RBAC configuration, you may need to take additional steps to allow users to perform touch actions. Observation. If you're on GKE, skip to .

🇧🇷 provision and manage TLS certificates in Kubernetes - jetstack/cert-manager. cert-manager currently does not provide a guarantee of compatibility with the Go module.

Rancher uses cert-manager to automatically generate and renew TLS certificates for Rancher HA deployments. Starting Fall 2019, three major changes.

Google provides a whitepaper for deploying production-ready GitLab on Google Kubernetes Engine, including all steps and setting up external resources.

This module implements the cert-manager utility on an existing K8S cluster with Helm 3. Version Compatibility. Module version, Terraform version, Helm version.

vendors/terraform-vendor-google/issues/new? and you want the provider to support a new feature or field, such as an enhancement/feature.

providers/terraform-provider-azurerm/issues/new? if you want the provider to support a new feature or field, please leave an enhancement/feature.

Support for monitoring in the cloud. For clusters with Google Kubernetes Engine Monitoring enabled, the Istio Stackdriver adapter is installed along with the kernel.

Here are instructions for preparing your Kubernetes cluster before deploying the Pulsar Helm chart. Google Kubernetes Engine. Hand set.

(Video) Autoscaling with GKE: Clusters and nodes

Google Cloud Certification Preparation: Cloud DevOps Engineer You will deploy a Kubernetes cluster using Google Kubernetes Engine and deploy pods in one.

GSP664. Google Cloud Labs at your own pace. Overview. Istio is an open source framework for connecting, securing, and managing microservices. This can be used.


How do I add a firewall rule in GCP? ›

Creating a firewall ingress rule
  1. Before you begin, verify the following: ...
  2. Go to the Firewall page in the Google Cloud console. ...
  3. Click Create firewall rule.
  4. Enter a Name for the firewall rule. ...
  5. Specify the Network in which you want to implement the firewall rule.
  6. Specify the Priority of the rule.

How do I add a rule to my firewall? ›

Windows 10
  1. Right-click the Windows Start button and select Control Panel.
  2. Click Windows Firewall.
  3. Click Advanced Settings.
  4. Click Inbound Rules, then New Rule.
  5. Select Port for the Rule Type, then click Next.
  6. Select TCP for Does this rule apply to TCP or UDP.

What is the default firewall rules in Gke? ›

Unless otherwise specified, the priority for all automatically created firewall rules is 1000, which is the default value for firewall rules. If you would like more control over firewall behavior, you can create firewall rules with a higher priority.

How do you secure a Gke cluster? ›

Harden your cluster's security
  1. On this page.
  2. Upgrade your GKE infrastructure in a timely fashion.
  3. Restrict network access to the control plane and nodes.
  4. Group authentication.
  5. Container node choices. ...
  6. Enable Workload Identity.
  7. Harden workload isolation with GKE Sandbox.
  8. Enable security bulletin notifications.

How do I create a firewall rule with TCP 80 protocol? ›

Create a firewall rule that allows traffic on HTTP (tcp/80) to any address and add network tag on juice-shop. In this step, you have to create a firewall rule that allows traffic on HTTP (tcp/80) to any address. In the GCP Console go to Navigation Menu >VPC Network > Firewall. Click Create firewall rule.

How do I check my GCP firewall rules? ›

Using GCP Console

03 Navigate to VPC Network dashboard at 04 In the navigation panel, select Firewall to access the list of VPC firewall rules created for the resources within the selected project.

How do I create a firewall rule in group policy? ›

Group policy changes to the Windows firewall
  1. Log into the client environment and click Start > Programs > Administrative Tools > Group Policy Management.
  2. Right-click the required domain name, and click Create a GPO in this domain and link it here.
  3. Enter a Name and click OK.

What is an example of a firewall rule? ›

Firewall ruleset example

Firewall rulesets frequently have source address, source port, destination address, destination port, and whether the traffic should be allowed or denied. For example, in this firewall ruleset example, the firewall is never directly accessed from the public network.

How do I change my GCP firewall rules? ›

Controller Firewall Rules

From the GCP console, navigate to VPC network > Firewall rules. Select Specified target tags to apply the firewall rules only to the selected instances within the virtual network. Enter the Target tags.

How do you name a firewall rule in GCP? ›

In the Google Cloud console, go to the Firewall page. Click Create firewall rule. Enter a Name for the firewall rule. This name must be unique for the project.

How do I give access to Gke cluster? ›

You can use both Identity and Access Management (IAM) and Kubernetes RBAC to control access to your GKE cluster: IAM is not specific to Kubernetes; it provides identity management for multiple Google Cloud products, and operates primarily at the level of the Google Cloud project.

How do I enable https on GKE? ›

Setting up HTTPS for GKE
  1. Give it a name.
  2. Select Backend configuration > Backend services > Create a backend service. Give it a name. Select the instance group of your cluster. ...
  3. Select Frontend configuration. Give it a name. Select protocol HTTPS. ...
  4. Select Create.

What is shielded GKE nodes? ›

Shielded GKE nodes provide strong, verifiable node identity and integrity to increase the security of Google Kubernetes Engine (GKE) nodes. Note: For GKE Autopilot clusters, the Shielded GKE nodes feature is enabled by default and cannot be overridden.

How you can ensure security of your cluster? ›

There are three critical factors for ensuring the Kubernetes network is secure:
  1. Enforce network policies to isolate Kubernetes clusters from the external world as much as possible.
  2. Enforce network policies to isolate the network of pods that work with sensitive data.
  3. Monitor the network for potential breaches.
Jul 24, 2022

How do I add port 80 to my firewall? ›

To open port 80
  1. From the Start menu, click Control Panel, click System and Security, and then click Windows Firewall. ...
  2. Click Advanced Settings.
  3. Click Inbound Rules.
  4. Click New Rule in the Actions window.
  5. Click Rule Type of Port.
  6. Click Next.
  7. On the Protocol and Ports page click TCP.
Nov 23, 2022

How to enable port 8080 in GCP? ›

6 Answers
  1. Go to the Developers Console and click on the corresponding project.
  2. Click on 'Compute'
  3. Click on 'Networks'
  4. Click on the name of the corresponding network. ...
  5. Under the Firewall rules section, click 'Create new'
  6. Enter a name for the firewall rule and in the field 'Protocols & ports' type: tcp:8080.
  7. Save the rule.
Sep 17, 2014

What is firewall rule in GCP? ›

Firewall rules in Google Cloud. When you create a VPC firewall rule, you specify a VPC network and a set of components that define what the rule does. The components enable you to target certain types of traffic, based on the traffic's protocol, destination ports, sources, and destinations.

What is the default SSH firewall rule in GCP? ›

The default-allow-ssh rule allows ingress connections on TCP port 22 from everywhere to all instances on the network. This rule allows SSH traffic, which is often used to remote into Linux VMs. The default-allow-rdp rule allows all inbound traffic on TCP port 3389 to all instances on the network.

Which resource are GCP firewall rules attached to? ›

Firewall rules can be attached to a VPC network or a firewall policy. Once the Compute Engine API is enabled, firewall rules can be configured and directly attached to the VPC network for filtering. Firewall rules attached to a VPC network are not readily portable to other VPC networks in other GCP projects.

How do I list all firewall rules? ›

How to list all iptables rules on Linux
  1. Open the terminal app or login using ssh command: $ ssh user@server-name.
  2. To list all IPv4 rules: $ sudo iptables -S.
  3. Get list of all IPv6 rules: $ sudo ip6tables -S.
  4. To list all tables rules: $ sudo iptables -L -v -n | more.
  5. Just list all rules for INPUT tables:
Dec 21, 2022

What should be the first rule in a firewall? ›

Firewall rules are shown as a list on the Rules page. The rules are applied from top to bottom, and the first rule that matches the traffic overrides all the other rules below. The main principle is to allow only the needed traffic and block the rest.

How do I Create a firewall policy table? ›

A firewall table lists rules to filter network traffic to and from private cloud resources.
Firewall rules
  1. Go to Network > Firewall tables.
  2. Select the firewall table.
  3. Click Create new rule.
  4. Set the desired firewall rule properties.
  5. Click Done to save the rule and add it to the list of rules for the firewall table.

How do I add a policy to a security group? ›

How to apply group policy to security group?
  1. Select the Group Policy Object in the Group Policy Management Console (GPMC). Click on the Delegation tab and then click on the Advanced button.
  2. Click on the Add button and select the security group that you wish to apply to .

How do I give permission to group policy? ›

Click the GPO. In the results pane, click the Delegation tab. Click Add. In the Select User, Computer, or Group dialog box, click Object Types, select the types of objects for which you want to add GPO permissions, and then click OK.

What are the 3 varieties of different firewall rules? ›

There are three basic types of firewalls that are used by companies to protect their data & devices to keep destructive elements out of network, viz. Packet Filters, Stateful Inspection and Proxy Server Firewalls.

What is the difference between firewall rule and policy? ›

Policy-based systems are more flexible than rules based systems. They allow the administrator to define conditions under which general types of communication are permitted, as well as specifying what functions and services will be performed to provide that communication.

What are 3 things a firewall can do for a network? ›

A host-based firewall is a software application or a suite of applications that allows for more customization. They are installed on each server, control incoming and outgoing traffic, decide whether to allow traffic to individual devices, and protect the host.

How do I add permissions to GCP? ›

Assign view permission for all Cloud projects in an organization
  1. Open the Cloud console at
  2. Click Menu menu > IAM & Admin > Manage Resources.
  3. Select your organization.
  4. At the right, click Add Principal.
  5. In New principals, add the users or groups you want to let view projects.

How do you manage firewall rules? ›

Best practices for firewall management
  1. Block all access by default. When configuring a firewall, it's important to start by blocking access to the network from all traffic. ...
  2. Regularly audit firewall rules and policies. ...
  3. Keep the firewall up-to-date. ...
  4. Keep track of authorized users.

How do you create a forwarding rule in GCP? ›

Creating a forwarding rule
  1. Set up a global external HTTP(S) load balancer.
  2. Set up a global external HTTP(S) load balancer (classic)
  3. Set up a regional external HTTP(S) load balancer.
  4. Set up an internal HTTP(S) load balancer.
  5. Set up an external TCP proxy load balancer.
  6. Set up an internal regional TCP proxy load balancer.

Where are firewall rules located? ›

Firewall rules are stored under the Software\Policies\Microsoft\WindowsFirewall\FirewallRules key. Each value under the key is a firewall rule. The type of the value MUST be REG_SZ. The data of each value is a string that can be parsed by the following grammar.

How do I give developers secure access to Kubernetes clusters? ›

How Can You Best Secure Your Kubernetes (K8s) Deployment?
  1. Enable Role-Based Access Control (RBAC)
  2. Use Third-Party Authentication for API Server.
  3. Protect ETCD with TLS and Firewall.
  4. Isolate Kubernetes Nodes.
  5. Monitor Network Traffic to Limit Communications.
  6. Use Process Whitelisting.
  7. Turn on Audit Logging.

How do I give someone access to Kubernetes? ›

  1. Create a user on the master machine then go into its home directory to perform the remaining steps. ...
  2. Create a private key: ...
  3. Create a certificate signing request (CSR). ...
  4. Sign the CSR with the Kubernetes CA. ...
  5. Create a “. ...
  6. Create the user inside Kubernetes. ...
  7. Create a context for the user. ...
  8. Edit the user config file.
Aug 7, 2019

What is the difference between IAM and RBAC in GKE? ›

If you primarily use GKE, and need fine-grained permissions for every object and operation within your cluster, Kubernetes RBAC is the best choice. IAM manages Google Cloud resources, including clusters, and types of objects within clusters. Permissions are assigned to IAM principals.

How do I add SSL to Kubernetes? ›

Self Signed Certificate
  1. Step 1: Generate a CA private key $ OpenSSL genrsa -out ca.key 2048.
  2. Step 2: Create a self-signed certificate, valid for 365 days. $ openssl req -x509 \ ...
  3. Step 3: Now, create the tls secret using the kubectl command or using the yaml definition. $ kubectl create secret tls my-tls-secret \

How do I add an SSL certificate to Gke? ›

Manually updating a Google-managed certificate
  1. Create a ManagedCertificate for the new domain.
  2. Add the name of the ManagedCertificate to the annotation on the Ingress using a comma-separated list. ...
  3. Wait until the ManagedCertificate becomes Active.

How do I add HTTPS to Kubernetes? ›

How to setup HTTPS connection with Ingress controller on your Kubernetes instance
  1. Install the NGINX ingress controller (ingress-nginx)
  2. Update the file.
  3. Once the ingress has acquired an external address.

What is Rbac in GKE? ›

To learn how to implement RBAC in Google Kubernetes Engine (GKE), refer to Configure role-based access control. RBAC is a core security feature in Kubernetes that lets you create fine-grained permissions to manage what actions users and workloads can perform on resources in your clusters.

Are GKE secrets encrypted? ›

By default, Google Kubernetes Engine (GKE) encrypts customer content stored at rest, including Secrets. GKE handles and manages this default encryption for you without any additional action on your part.

What are the two types of nodes in Kubernetes called? ›

Nodes in a Kubernetes cluster may be physical, or virtual. There are two types of nodes: A Control-plane-node type, which makes up the Control Plane, acts as the “brains” of the cluster. A Worker-node type, which makes up the Data Plane, runs the actual container images (via pods).

How do I restrict access in Kubernetes? ›

  1. Configuration.
  2. Apply Pod Security Standards at the Cluster Level. Apply Pod Security Standards at the Namespace Level. Restrict a Container's Access to Resources with AppArmor. Restrict a Container's Syscalls with seccomp.
  3. Services.
Jul 9, 2022

How do I improve security in Kubernetes? ›

  1. Reconfiguring a kubeadm cluster. Changing the Container Runtime on a Node from Docker Engine to containerd. ...
  2. Use a User Namespace With a Pod.
  3. Troubleshooting Applications. ...
  4. Horizontal Pod Autoscaling. ...
  5. Job with Pod-to-Pod Communication. ...
  6. Deploy and Access the Kubernetes Dashboard.
  7. Use a SOCKS5 Proxy to Access the Kubernetes API.
Nov 4, 2022

How is security handled in Kubernetes? ›

Kubernetes API Security

The Kubernetes API is designed to be secure by default. It will only respond to requests that it can properly authenticate and authorize. That said, API authentication and authorization are governed by RBAC policies that you configure. Thus, the API is only as secure as your RBAC policies.


1. What is Ingress in GKE or My understanding of Network LB(L4) Vs HTTP(s) Global LB (Ingress) in (GKE)
(Learn GCP with Mahesh)
2. How to Implement Network Policy in Google GKE to Secure Your Cluster
3. F5 CIS and Google GKE Jeff's Quick Setup
(Jeff Giroux the Cloud Guru)
4. Kubernetes Networking / Service: Node Port
5. Cloud Native Networking and GKE Networking features
(GDG Cloud Bengaluru)
6. how to create firewall rule in gcp
(Zariga Tongy)
Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated: 03/13/2023

Views: 6106

Rating: 4.1 / 5 (62 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.